full image - Repost: Unrelated devices lose connection when introducing an RB952Ui-5ac2nD to the network through WiFi. (from Reddit.com, Unrelated devices lose connection when introducing an RB952Ui-5ac2nD to the network through WiFi.)
Mining:
Exchanges:
Donations:
Heya! I have a network with the following setup: https://ift.tt/yw63acV, the RB952Ui-5ac2nD is a new addition. It's set up with wlan2 and ether2 inside a bridge with the wireless interface set in station-pseudobridge mode. This is the actual config: /interface bridgeadd name=bridge1/interface wirelessset [ find default-name=wlan1 ] ssid=MikroTikset [ find default-name=wlan2 ] band=5ghz-a/n/ac basic-rates-a/g=\ 6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps channel-width=\ 20/40/80mhz-Ceee country=secret disabled=no installation=indoor mode=\ station-pseudobridge ssid="MyWiFi"/interface listadd name=WANadd name=LAN/interface wireless security-profilesset [ find default=yes ] authentication-types=wpa-psk,wpa2-psk group-ciphers=\ tkip,aes-ccm mode=dynamic-keys supplicant-identity=MikroTik \ unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=secret \ wpa2-pre-shared-key=secret/ip hotspot profileset [ find default=yes ] html-directory=hotspot/interface bridge portadd bridge=bridge1 interface=wlan2add bridge=bridge1 interface=ether2/interface list memberadd interface=wlan2 list=WANadd interface=ether1 list=LANadd interface=ether2 list=LANadd interface=ether3 list=LANadd interface=ether4 list=LANadd interface=ether5 list=LANadd interface=wlan1 list=LAN/ip addressadd address=192.168.0.14/24 interface=bridge1 network=192.168.0.0/system identityset name=RouterOSBut I ran into a problem where, the minute it connects to the EAP245, Site B dies. Site A keeps working but all devices in Site B just lose connection. Also, if I connect ether2 on the RB952Ui-5ac2nD directly to the Site A switch, and turn off wlan2, things work correctly. I don't understand why that would make a difference. Any ideas why this happens? Any help would be appreciated.
Social Media Icons